Rear Bumper Number 2(!)
April 2007

Well, after building my first bumper a few years ago I thought I was done. So once the old one was
crushed, I decided that I needed to build a new one with more protection and thicker steel. So
bumper number 2 is 3/16" wall 4"x2" rectangle tubing that is wider and wraps further than bumper
number 1. I added "wings" on the corners to protect the corners a bit better, and I still need
to tie the forward extensions to the frame for additional strength. I hope this one holds up a bit

|-   Site designed and maintained by me   -|
|-      Contact Me      -|